Lawn Loom: How to construct artificial lawn - Changzhou Wuding Carpet Machinery Co., Ltd

Lawn Loom: How to construct artificial lawn
2020-07-16
Many people believe that the experience of artificial grass depends on the quality of lawn, but this is not the case. The quality of artificial turf is closely related to the later viewing and experience, but whether the lawn is laid reasonably is also important. The impacts of unreasonable laying methods shared by lawn looms are as follows:

1.The site for laying artificial turf needs to meet certain flatness and compactness requirements. If it fails to meet the requirements, the laying effect of artificial turf will be affected;

2.The lawn joint surface shall be paved with special lapping cloth and fixed with steel nails. The head of the steel nail shall not be raised, otherwise, the lapping cloth will not contact the lawn firmly and the adhesion will be weak;

3.The lawn shall be paved with special glue for artificial grass, otherwise the lawn will crack and fall off in a short time, especially in the rainy south. More importantly, the environmental protection of glue directly affects the physical and mental health of you and your family;

4.The glue should be thick and even, and should not be applied repeatedly, otherwise bubbles will appear, the adhesion is weak, or even fall off;

5.The bottom surface of bonded turf and lapping cloth shall be cleaned, and the surface shall be dry without water. The adhesive should not be exposed for too long. The construction temperature is better than 5 ℃, which is not suitable for rainy and moldy days. Otherwise, the bonding time will be too long, the bonding strength will be unqualified, or even the phenomenon of non adhesion will occur.

新闻中心